Lighting power - 9W

Color temperature - 2600-5000K

Color rendering index - Ra 90

Xiaomi Mi Desk Lamp 1S

View the embedded image gallery online at:
https://tfn-trading.com/catalog?start=21#sigProId304caaca38
  • Description
  • Specification

 Ideal for reading and desk work

MiHome Desk Lamp 1S has retained the overall design and dimensions of the body, while increasing the luminous flux by 73% to 520 lm compared to the previous generation of lamps. The illumination level in the center was increased to 1250 lux, which is 66% higher than that of the first generation lamps. The new generation fully complies with the most stringent requirements of the state standard in the field of workplace illumination.

 

No flicker at any brightness and temperature

В MiHome Desk Lamp 1S используется особый механизм управления освещением, полностью исключающий образование мерцания. Даже на низкой яркости обеспечивается надежность и контроль яркости, как при использовании традиционных систем с широтно-импульсной модуляцией, при этом лампа совершенно не мерцает и не утомляет глаза.

 

4 lighting modes for eye health

To create the right lighting for different occasions, the MiHome Desk Lamp 1S has 4 lighting modes, each of which is perfect for satisfying your need for good light without harming your eyes. For example, in the mode of maintenance of attention, the lamp with the help of "breathing" light can remind you to take a rest in order to increase work efficiency.

 

Support for control via voice assistants

MiHome Desk Lamp 1S is fully compatible with MiHome and Apple HomeKit ecosystems, so you can use a voice assistant for control. In addition, brightness and temperature can be freely adjusted with a simple rotary switch.

 

 

Weight (g)

800

Case material

Plastic

Dimensions

162 x 162 x 479 mm

Service life

25000 h

Lighting power

9W

Color temperature

2600-5000K

Compatible

Android 4.4 and above, iOS 9.0 and above

Color rendering index

Ra 90

Color temperature from 2700K to 5700K

Service life almost 25000 h

Wi-Fi and Bluetooth support

Xiaomi Mi Smart Ceiling Light (450mm)

View the embedded image gallery online at:
https://tfn-trading.com/catalog?start=21#sigProIdb3a84a466e
  • Description
  • Specification

 Add life to the right light

MiHome LED Ceiling Lamp boasts a color rendering index of Ra95. These high rates are found in museum lamps that can preserve and reproduce the natural colors of things, and now you can add such lighting to your life. The right lighting can help create a warm atmosphere to enjoy your favorite movie or book.

 

Illuminates every corner

MiHome LED Ceiling Lamp is equipped with 72 bright LED elements arranged in a special order, making the light soft and even. The luminaire is perfect for rooms up to 25 m² - living rooms, bedrooms and more. The one-piece aluminum base promotes rapid heat dissipation and extends the luminaire's lifespan to 25,000 hours.

 

MiHome app support

Using the MiHome app, you can set a delayed lamp off or on timer, turn on a nightlight mode, or set up interaction with other smart devices. For example, the lamp can turn off as soon as the Xiaomi Mi Band detects a given sleep phase, and now you do not have to crawl out from under the blanket to turn off the light..

 

Voice command support

It is possible to control the brightness and temperature of the MiHome LED Ceiling Lamp not only using the application. The luminaire can be set to three modes of operation with different brightness and temperature of light, which can be switched between using a conventional wall switch. In addition, control using the Yeelight remote control is supported, as well as voice control via the Xiaomi Mi AI Speaker and Mi AI Speaker mini.

 

Remote control via Wi-Fi and Bluetooth

To create a truly smart home, the luminaire can be configured to work seamlessly with other devices. For example, you can set the light on to open the front door or off to open the windows. By connecting a motion sensor, you can make the light automatically turn on when motion is detected. Moreover, a smart Bluetooth gateway allows you to connect devices to the Internet so that you can view the status of your smart home and each individual device from anywhere in the world.

 

Dust and insect protection

In conventional luminaires, the diffuser is separated from the body, so insects and dust can easily penetrate there. However, in the one-piece construction of the MiHome LED Ceiling Lamp, the diffuser is tightly fitted to the body, so that neither dust nor insects can get inside, and the lamp will retain its pristine purity and brightness.

 

Dimensions

450 x 75 x 27 mm

Lifetime

25,000 h

Lamp shape

Round

Lamp diameter

45 cm

Lighting power

32 W

Colour temperature

2700-5700K

Compatibility

Android 4.4 and above, iOS 8.0 and above

Color rendering index

Ra 95

348 PPI AMOLED Display

Slim Metal Body

14-day Battery Life

5 ATM Water Resistance

Amazfit GTS 2

View the embedded image gallery online at:
https://tfn-trading.com/catalog?start=21#sigProIde74f14e21c
  • Description
  • Specification

 

Unprecedented HD Experience 344 PPI AMOLED Display

Amazfit GTS uses a top-class high-resolution screen, whose pixel density is as high as 341 PPI and has a 348 by 442 resolution, bringing an unprecedented clearness in details. Moreover, the customized 1.65 inch AMOLED display takes the fineness of the color display to a whole new level. The 100% NTSC color spectrum and ultra-high color saturation make the display super-lifelike, while a bright and transparent 2.5D glass lens makes every screen-on as stunning as if you're seeing it for the very first time.

A Stylish Large Square Screen That Shows More Content. New Editable Modular Watch Faces, For What You Care About
The customized 1.65-inch stylish square screen offers a larger display area than a round watch face of the same width, so it can carry more information. Additionally, we have released two innovative modular watch faces that can be customized to display essential information such as the heart rate, calendar, weather and events you care about the most, all in one watch face that's easy to check. In total, you can customize up to 7 widgets out of 17 functions.

Colorful & Slim Metal Watch Body. 6 Attractive Colors To Choose From.
A smooth transition from the 2.5D curved glass to the metal watch body lowers the thickness to 9.4 mm, which makes it slim and delicate. The aircraft-grade aluminum alloy compactness also helps control the weight of the watch body, which is as light as 24.8 g, but also strong and robust. In addition, there are 6 vigorous and fashionable colors to choose from, so it can fit any taste or situation.

Note: 24.7 g excludes the weight of the strap.

  • Dimensions

    42.8 x 35.6 x 9.3mm
  • Weight
    (without strap)

    Approx. 24.7g
  • Body material

    Aircraft-grade aluminum alloy, polymer material
  • Strap material

    Silicone
  • Strap length

    120 mm (long), 87 mm (short)
  • Strap width

    20mm
  • Waterproof rating

    5 ATM
  • Display

    1.65" AMOLED, resolution 348 x 442, 341ppi, 100% NTSC
  • Touch screen

    Corning Gorilla 3 generation tempered glass + anti-fingerprint coating
  • Sensors

    BioTrackerTM PPG Bio-Tracking Optical Sensor
    6-axis acceleration sensor
    3-axis geomagnetic sensor
    Air pressure sensor
    Ambient light sensor
  • Bluetooth

    BT5.0 BLE
  • Battery

    246mAh lithium-ion polymer battery (typical value)
  • Charging time

    About 2 hours
  • Charging method

    Magnetic / 2-pins POGO pin
  • Battery Life

    Daily use mode: 14 days
    Heart rate always on, sleep monitoring; 150 pushed notifications lighting-up the screen, lift the wrist to see the time 30 times, and 5 minutes for other operations every day; exercise 3 times a week for 30 minutes with the GPS on.
  • Basic watch mode: 46 days
    Turn off the Bluetooth connection, heart rate and other functions, and lift the wrist to see the time 100 times a day.
  • Supported devices

    Android 5.0 or iOS 10.0 and above
  • Accessories

    Magnetic charging stand, user manual

Metallic elegant design

AMOLED display with 454 ppi

5 ATM waterproof

12 sports modes

Amazfit GTR 2

View the embedded image gallery online at:
https://tfn-trading.com/catalog?start=21#sigProIdf42dc09eae
  • Description
  • Specification

 

With a harmonized classic watch design the Amazfit GTR 2 adopts a classic design with a circular watch face. The watch body is made of metals, making it light, elegant but also robust.

Large 454 PPI AMOLED Display with Watch Faces. Outstanding and more Comfortable Viewing Experience
Stunning 454 PPI AMOLED Display that will keep you staring at your watch. The watch face store provides a great variety of original interfaces, making your Amazfit GTR 2 a seamless work of art.

A Revolutionary Battery Life of 24 Days.
No Worries About Running Out of Battery Anymore
An advance chip with low power consumption, a new and enhanced circuit design, a deep-in power optimization and power consumption management, enable the Amazfit GTR 2 to perform perfectly for over three weeks.

Water Resistant up to 5 ATM and High-precision GPS.
Your Best Companion for Mountain Climbing or Swimming
Amazfit GTR 2 is water resistant to a depth of 50 meters, which is comparable with traditional high-end watches, so you have nothing to worry when wearing it in daily life or swimming. Moreover, the high-precision GPS positioning system is continuously optimized to provide rich exercise data for your outdoor exercise.

  • Dimensions

    47.7 X 47.7 X 13.5 mm
  • Weight

    58g (with strap)
  • Waterproofing

    5ATM, supports swimming
  • Screen

    1.3”AMOLED, Resolution 360 x 360
  • Touch Screen

    Corning Gorilla Glass 3 + anti-fingerprint coating
  • Sensors

    BioTrackerTM PPG Bio-Tracking Optical Sensor
    3-axis acceleration sensor
    Geomagnetic sensor
    Ambient light sensor
  • Positioning

    GPS + GLONASS
  • Connectivity

    Bluetooth 5.0/BLE
  • Battery

    390mAh LiPo (Minimum value)
  • Accessories

    Magnetic charging base, user manual
  • Charging method

    Magnetic, 2pin pogo pin charging
  • Theoretical Charging Time

    Magnetic, 2pin pogo pin charging
  • Battery Life

    Daily use mode:20 days Heart rate monitoring always on, sleep monitoring; GPS turned on for 13 minutes a day, 150 messages pushed daily which activate screen, wrist raised 30 times which activate screen, 5 minutes of other operations.GPS continuous working time: 20 hours GPS activated to track exercise and monitor heart rate.
  • Basic watch mode: 66 days Bluetooth connection to phone turned off, heart rate monitoring and other functions, screen activated by wrist tilt 100 times a day.
  • Body Material

    Polymer materials
  • Supported devices

    Android 5.0 or iOS 10.0 and above

Sensor display: 6.53"
Resolution: 1600x720 HD+
Internal memory: 32/64 Gb
Main camera: 13MP+5MP+2MP
Bluetooth, Wi-Fi, GPS, NFC, Beidou

Redmi 9C 32/64GB

View the embedded image gallery online at:
https://tfn-trading.com/catalog?start=21#sigProId3fe0cf90fe
  • Description
  • Specification

Redmi 9C is made in the popular monoblock form-factor. Device is equipped with a capacitive touch screen with a diagonal of 6.53" inches and 2340x1080 FHD+ pixels resolution.
The smartphone is running Android, equipped with octacore processor 2.3 GHz, 32/64GB internal memory and all the necessary modern communication interfaces.
13+5+2 megapixels main camera supports video recording, while the front camera (5 megapixel ) will be useful when make video calls in Skype, Viber, and other applications.
Redmi 9C has built-in GPS-navigator with the system of coordinates detection GPS, thanks to which traffic info will be updated faster, even if driving at high speed. This feature will be useful if the user is driving in unfamiliar location.

PLATFORM
Android
Octa-core, 8 x 2.3 GHz Cortex-A53

DISPLAY
6.53" 1600x720 HD+

MEMORY
32/64GB ROM + 2/3GB RAM
Support memory cards: microSD

NETWORK
GSM: B2/3/5/8
WCDMA: B1/2/4/5/8
LTE-FDD: B1/2/3/4/5/7/8/20/28
LTE-TDD version 1: B38/40/41 (2540-2640MHz)
LTE-TDD version 2: B38/40

SIM Card Type: Dual Sim

CAMERA
Main Camera: 13MP+5MP+2MP
Secondary: 5MP

BATTERY
5000 mAh

SIZE
163.3 x 77 x 9.1 mm
198g

Powerful cleaning, cord-free
5-step filtration captures up to 99.97% of particles

Xiaomi Dreame V11

  • Description
  • Specification

 

Xiaomi Dreame V11 Cordless Vacuum Cleaner

Here we present you the Xiaomi Dreame V11, a modern cordless vacuum cleaner with a powerful brushless motor, an excellent filtering system, high autonomy and an OLED screen where you can see the most relevant information, as well as a beautiful design in grey and red!

Noise reduction in 7 steps

Despite the high suction power, the Xiaomi Dreame V11 produces a noise level of less than 72 dB, partly because its motor is brushless and therefore reduces friction. But it should also be noted that Dreame has taken the utmost care in design for this purpose, including a rather efficient 7-stage system.

2-Cone Cyclone Technology

In addition, the cyclonic technology used by the Dreame V11, consisting of 12 cones, not only helps with the efficiency of the filtering system, but also allows the vacuum cleaner to maintain suction capacity as its 0.5L reservoir fills, contributing to its effectiveness and efficiency.

5-level particle filtering

In addition to this, the Xiaomi Dreame V11 finishes with 99.7% of particles thanks to its 5 levels of particle filtering, another highlight of this vacuum cleaner. The V11's cyclonic technology and multiple filters trap up to 99.67% of the micro-particles of dust and mites, expelling cleaner air. This is why the Xiaomi Dreame V11 is indicated for people suffering from any type of allergy or respiratory condition.

Built-in OLED display

Another feature that makes the Xiaomi Dreame V11 a premium vacuum cleaner is its OLED display, through which we can know at all times the available battery level, the status of the filters, as well as the selected suction power.

 

Battery: capacity: 3000 mAh;

 

Weight: 1.6 kg;

 

Nominal power: 450 W;

 

Nominal voltage: 25.2 V;

Powerful cleaning, cord-free
5-step filtration captures up to 99.97% of particles

Xiaomi Dreame XR

  • Description
  • Specification

 

Perfect for all types of houses

The Xiaomi Dreame XR is specially designed so that you can use it in all possible situations, that is why it has a reduced weight and size, as well as various heads, which allow you to use it on softer or harder surfaces, the walls, the holes of the sofa, etc. Especially thanks to the independent motors for the brushes. In addition, it achieves a purification rate of 99.9%, with 5 stages of dust filtering. And, thanks to its HEPA filter, it can capture particles down to 0.3µm. Dust mites won't be a problem either, as the XR vacuum cleaner is capable of removing 99.9% of the dust you have around the house.

Super suction power with four independent motors

Of course, one of the features Xiaomi Dreame XR vacuum cleaner stand out is its suction power. This due to its composition of 4 independent motors: a main motor, a large diameter motor for the main brush, another double spiral motor for the brush and a motor for the deep removal of mites. This motor system is capable of optimizing the effectiveness of the device, maintaining a stable and strong use of power, being able to handle any type of surface.

MES system with cooling system

It performs its function thanks to an exhaustive channel, achieving a real-time heat dissipation and ensuring the perfect working state of both the engine and the battery.

 

Battery: 2500 mAh

 

Weight: 1.5 kg

 

Nominal power: 450 W

 

Nominal voltage: 25.2 V

12 Military Certifications
Rugged Body
20-day Battery Life
AMOLED Display

Amazfit T-Rex

  • Description
  • Specification

12 Military Grade Certifications Resistant to Harsh Environments
Robustness and reliability are particularly important for outdoor smartwatches. Amazfit T-Rex passed 12 military grade certifications, ensuring its robustness and resistance to harsh environments.

20-Day Ultra-Long Battery Life Fighting The Wilderness with You
A new circuit design especially developed for Amazfit T-Rex, an advanced low power-consumption chip, and a deep power optimization give the Amazfit T-Rex a longer battery life. Stays with the user over the long haul, allowing you to wear it without worry and never think about charging.

1.3-Inch AMOLED Color Screen and Always-On Display
Choose A Watch Face to Match Your Personality
The Amazfit T-Rex uses a 1.3-inch AMOLED color screen which supports always-on display, making important information available simply by raising your wrist. Moreover, the variety of gorgeous watch faces allows you to fully express your personality.

 

  • Dimensions

    47.7 X 47.7 X 13.5 mm
  • Weight

    58g (with strap)
  • Waterproofing

    5ATM, supports swimming
  • Screen

    1.3”AMOLED, Resolution 360 x 360
  • Touch Screen

    Corning Gorilla Glass 3 + anti-fingerprint coating
  • Sensors

    BioTrackerTM PPG Bio-Tracking Optical Sensor
    3-axis acceleration sensor
    Geomagnetic sensor
    Ambient light sensor
  • Positioning

    GPS + GLONASS
  • Connectivity

    Bluetooth 5.0/BLE
  • Battery

    390mAh LiPo (Minimum value)
  • Accessories

    Magnetic charging base, user manual
  • Charging method

    Magnetic, 2pin pogo pin charging
  • Theoretical Charging Time

    Magnetic, 2pin pogo pin charging
  • Battery Life

    Daily use mode:20 days Heart rate monitoring always on, sleep monitoring; GPS turned on for 13 minutes a day, 150 messages pushed daily which activate screen, wrist raised 30 times which activate screen, 5 minutes of other operations.GPS continuous working time: 20 hours GPS activated to track exercise and monitor heart rate.
  • Basic watch mode: 66 days Bluetooth connection to phone turned off, heart rate monitoring and other functions, screen activated by wrist tilt 100 times a day.
  • Body Material

    Polymer materials
  • Supported devices

    Android 5.0 or iOS 10.0 and above

Sensor display: 6.53"
Resolution: 2340x1080 FHD+
Internal memory: 32 Gb
Main camera: 13MP+8MP+5MP+2MP
Bluetooth, Wi-Fi, GPS, GLONASS, Beidou

Redmi 9 32GB

  • Description
  • Specification

Redmi 9 is made in the popular monoblock form-factor. Device is equipped with a capacitive touch screen with a diagonal of 6.53" inches and 2340x1080 FHD+ pixels resolution.
The smartphone is running Android, equipped with octacore processor 2 GHz, 32GB internal memory and all the necessary modern communication interfaces.
13+8+5+2 megapixels main camera supports video recording, while the front camera (8 megapixel ) will be useful when make video calls in Skype, Viber, and other applications.
Redmi 9 has built-in GPS-navigator with the system of coordinates detection GPS, thanks to which traffic info will be updated faster, even if driving at high speed. This feature will be useful if the user is driving in unfamiliar location.

PLATFORM
Android
Media Tek Helio G80, Up to 2.0 GHz; 2 ARM Cortex A75 + 6 ARM Cortex A55, Octa-core CPU

DISPLAY
6.53" 2340x1080 FHD+

MEMORY
32GB ROM + 3GB RAM
Support memory cards: microSD

NETWORK
GSM: B2/3/5/8
WCDMA: B1/2/4/5/8
LTE-FDD: B1/2/3/4/5/7/8/20/28
LTE-TDD version 1: B38/40/41 (2540-2640MHz)
LTE-TDD version 2: B38/40

SIM Card Type: Dual Sim

CAMERA
Main Camera: 13MP+8MP+5MP+2MP
Secondary: 8MP

BATTERY
5020 mAh

SIZE
163.3 x 77 x 9.1 mm
198g

Sensor display: 6.67"
Resolution: 2400x1080 FHD+
Internal memory: 128 Gb
Main camera: 64MP + 8MP + 5MP + 2MP
Bluetooth, Wi-Fi,GPS, AGPS, GLONASS, Beidou

Redmi Note 9 Pro 128GB

  • Description
  • Specification

Redmi Note 9 Pro is made in the popular monoblock form-factor. Device is equipped with a capacitive touch screen with a diagonal of 6.67" inches and 2400x1080 FHD+ pixels resolution.
The smartphone is running Android, equipped with octacore processor 2,3 GHz, 64GB internal memory and all the necessary modern communication interfaces.
64 + 8 + 5 + 2 megapixels main camera supports video recording, while the front camera (16 megapixel ) will be useful when make video calls in Skype, Viber, and other applications.
Redmi Note 9 Pro has built-in GPS-navigator with the system of coordinates detection GPS, thanks to which traffic info will be updated faster, even if driving at high speed. This feature will be useful if the user is driving in unfamiliar location.

PLATFORM
Android
Qualcomm® Snapdragon™ 720G Octa-core processor

DISPLAY
6.67" 2400 x 1080 FHD +

MEMORY
128GB ROM + 6GB RAM
Support memory cards: microSD

NETWORK
GSM: B2/3/5/8
WCDMA: B1/2/4/5/8
TDD LTE: B38/40
FDD LTE: B1/2/3/4/5/7/8/20/28

SIM Card Type: Dual Sim

CAMERA
Main Camera: 64MP + 8MP + 5MP + 2MP
Secondary: 16MP

BATTERY
5020 mAh

SIZE
165,8 x 76,7 x 8.8 mm
209 g

Electric air vent car phone holder/ Qi wireless charger with an infrared sensor

Baseus Wireless Charger Smart Vehicle Bracket

  • Description
  • Specification

Electric air vent car phone holder/ Qi wireless charger with an infrared sensor
Infrared sensor – After the sensor detects a mobile phone, the arms will stretch automatically and they will close automatically after a short delay to clamp the device.
Easy to use – Without annoying adjusting. Thanks to the auto clip, the holder is always ready to put down and ready to take away.
Fully adjustable – Full 360 view with easy 90 horizontal and vertical angle rotations.
Enhanced protection with silicone cover – The inner clip is protected with silicone material that can prevent minor scratches on the phone cover.
Bigger charging coil – Newest, upgraded version of a charging coil. Large and independent. With built-in non-magnetic shim. Brings automatic and efficient magnetic sensing.
10 levels of protection – Over current, overcharge, over discharging, overheat, over power, over voltage, short circuit, electromagnetic field, anti-reverse, and recovery protection.
Anti-shock clamp design – Special triangle clamp design makes mount stable as a mountain.

Brand Name: Baseus
Material: Aluminum, Polycarbonate, Silicone
Power: 10 W
Black colour

Gravity air vent car phone holder with wireless charging function

Baseus Wireless Charger Gravity Car Mount

  • Description
  • Specification

Easy to use - Without annoying adjusting. Thanks to the auto clip, holder is always ready to put down and ready to take away.
Big charging coil – Bigger charging coil = larger charging area without smartphone placing problems.
Antishock design – Special triangle design makes mount stable as a mountain.
360º angle movement – Headball under the magnetic plate gives 360º rotational function for unlimited viewing surfaces.
Enhanced protection with TPU cover – The inner clip is protected with TPU material that can prevent minor scratches on the vent.
Transmission distance less than 6 mm – There is no need to take off phones case for charging.
Durable and reliable – Made of high-quality ABS material with aluminum clips and tempered glass panel.
10 levels of protection – Over current, overcharge, over discharging, overheat, over power, over voltage, short circuit, electromagnetic field, anti-reverse, and recovery protection.
For every air outlet type – Accessory is compatible with 98% of car air vent types.

Brand Name: Baseus
Material: aluminum, polycarbonate, glass
Power: 10 W
Color: Dark Gray

Baseus Travel Charger display 3USB 3.4A

  • Description
  • Specification

Voltage/power display – Thanks to the LED voltage/power display you know the charging state all the time.
3 USB ports – You can charge 3 devices at the same time.
Durable and reliable – Made of premium quality materials: ABS + PC. Fireproof, temperature-resistant & inflaming retarding.
Intelligent management chip – Recognizes the electronic device and maximizes charging efficiency.
Many levels of protection – Over-current, over-voltage, over-temperature, short-circuit, and leakage protection.
100 - 240V broadband voltage – Adapt to use in different countries and regions.

 

Brand: Baseus
Name: Mirror Lake
Model: NRT-DY035
Material: PC + ABS
Plug: European
Ports: 3x USB
Voltage range: 100 – 240V
Output: USB1 - 5V/1A, USB2/USB3 - 5V/2.4A
Size: 4,6 x 8,2 x 2,8 cm
Weight: 61 g
Additional features: voltage / power display

Baseus 0.3mm Full-glass Tempered Glass Film For iPX/XS Transparent

Baseus Tempered Glass 0.3mm for X/XS

  • Description

Baseus 0.3mm Full-glass Tempered Glass Film For iPX/XS Transparent

Car charger with FM Bluetooth Transmitter

Baseus S-09 Bluetooth Car Charger Black

  • Description
  • Specification

Your own radio station – FM transmitter and Bluetooth technology allows to create your own music station with your’s favorites songs. All you need to do is plug the device, pair it with your smartphone and adjust the car FM frequency.
Comfortable hands-free calls – Built-in HD microphone provides clear and smooth hands-free conversation. Phone answer, hang up, reject, redial - all that with only one key.
2 devices at the same time – Two USB output ports = charge 2 devices simultaneously.
Plug and play – Another way to play your own music is plug USB flash drive or TF/micro SD card with some audio files (MP3/WMA/WAV/FLAC).
When navigation is to quiet – Transmitter could also be used as a navigation voice amplifier. With it, all directions will be heard loud and clear.
Digital display – Useful digital display shows a state of battery voltage and current using frequency.

  • Brand: Baseus
  • Name: T-Typed
  • Model: S-09
  • Material: PC
  • Input: DC 12V-24V
  • Output: 3.4A (max)
  • Bluetooth: 4.2
  • Frequency of transmission: 87,5-108.0MHZ
  • FM range: 3-5 m
  • Bluetooth range: 5-10 m (max)
  • Ports: 2x USB, TF/micro SD card slot
  • Audio format: MP3/WMA/WAV/FLAC
  • Size: 7 x 4,8 x 3 cm
  • Weight: 33 g
  • Compatibility: iOS/Android

Smart car charger with 2 USB (QC3.0) ports

Baseus Quick Car Charger 30W QC3.0 black

  • Description
  • Specification

Compact and space-saving – Simple but stylish design that allows to saving space in a car.
Compendium of fast charging – Accessory supports all most popular fast charging technologies: Quick Charge 3.0 and 2.0 (QC 3.0. QC 2.0), SCP (Huawei), AFC (Samsung), PE+ (MTK).
Even 30W! – The maximum charging power can reach 30W. As fast as any original charger!
2 devices at the same time – Two output ports = charge 2 devices simultaneously.
Durable and reliable – Charger shell is made from high-quality aluminum alloy. Tough and elegant.
Many levels of protection – Over-current, over-power, over-voltage, over-charge, over-discharge, overheat, short-circuit, and electromagnetic field protections.
Intelligent management chip – Adjusting optimal current to specific devices.
LED light – Soft blue power indicator makes charger more convenient to use in the nighttime.

 

  • Brand: Baseus
  • Name: Square
  • Model: BS-C16Q
  • Material: Aluminum
  • Ports: 2x USB (QC 3.0)
  • Input: DC 12 - 24V
  • Output: USB1 - 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A; USB2 - 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A; USB1 + USB2 - 5V/5A (max)
  • Additional features: LED light

Enormous capacity power bank with 5 ports

Baseus Mini JA Power Bank FC 3A 30000mAh

  • Description
  • Specification

Three-port input and output – The convenient and multi-functional power bank can charge 3 devices at the same time with his 2 USB and USB-C ports. Also, it could be charged by 3 ports - USB-C, Lightning, and micro USB.
Enormous capacity – 30000 mAh allows you to recharge your devices multiple times.
3 devices at the same time – Three output ports (2x USB QC 3.0 and USB-C PD) = charge 3 devices simultaneously.
Also for notebooks – Thanks to USB-C PD port you can power up your laptop or notebook (even MacBook).
Bi-directional quick charging – The accessory is both charging and discharging with 5V/3A power.
Durable and reliable – Power bank shell is made from high-quality materials - ABS and PC.
Smart chip – Adjust proper current to the connected device based on intelligent identification technology.
8 levels of protection – Over current, overcharge, over discharging, over power, over voltage, short circuit, overheating, and anti-reverse protection.
Useful LED indicators – Notify user about battery level and start/end of charging.
Multiple certifications – Comply with certification standards of FCC, CE, ROHS and GB/T-35590-2017.

  • Brand: Baseus
  • Name: Mini JA
  • Model: X30
  • Material: ABS + PC
  • Capacity: 30000 mAh
  • Battery type: Li-Polymer
  • Ports: 2x USB, USB-C PD, micro USB, Lightning
  • Input: Lightning – 5V/2.1A; micro USB: 5V/2.1A); USB-C PD – 5V/2.1A
  • Output: USB1 - 5V/1A, USB2 – 5V/2.4A; USB-C - 5V/3A
  • Size: 15,6 x 7,4 x 3,3 cm

Baseus Mini JA Power Bank FC 3A 20000mAh

  • Description
  • Specification

A large amount of ports – Baseus Mini JA is the convenient and multi-functional power bank with 4 ports. 2x USB and USB-C for charging your mobile devices and mentioned USB-C and micro USB to charge accessory itself.
Also for notebooks – Thanks to USB-C port you can power up your laptop or notebook (even MacBook).
Huge capacity – 20000 mAh allows you to recharge your devices multiple times. The perfect way to stay online during several days of camping, hiking or at a music festival.
3 devices at the same time – Three output ports (2x USB and USB-C) = charging 3 devices simultaneously. For you and your family or friends. Without waiting in line to get some energy for your device.
Durable and reliable – Power bank shell is made from high-quality materials - ABS and PC, so you no need to worry about damaging it in the transport.
Smart chip – Adjust proper current to the connected device based on intelligent identification technology. Optimum speed of charging without unnecessary risk.
9 levels of protection – Over current, overcharge, over discharging, over power, over voltage, short circuit, overheating, anti-reverse and recovery protection. Complete security for your smartphone and powerbank itself.
Useful LED indicators – 4 LED indicators in the clear and easy way will notify you about battery level and start/end of charging.

  • Brand: Baseus
  • Name: Mini JA
  • Model: X20
  • Material: ABS + PC
  • Capacity: 20000 mAh
  • Battery type: Li-Polymer
  • Ports: 2x USB, USB-C, micro USB
  • Input: micro USB: 5V/2.1A); USB-C – 5V/2.1A
  • Output: USB1 - 5V/1A, USB2 - 5V/2.4A; USB-C - 5V/3A

Baseus Magnet Car Mount Black

  • Description
  • Specification

The Baseus Magnet SUGENT-MO01 holder is made of aluminum, compact and stylish, mounted in a deflector. The contact areas with the smartphone have silicone pads. The holder rotates 360 degrees - this will allow you to choose a convenient position for you smartphone. The phone is attached to the holder using a magnetic plate, which is placed under the cover or mounted on double-sided tape.

 

 

Brand Name: Baseus
Material: aluminum, silica gel
Black colour

Baseus Car Mount Future Gravity Black

  • Description
  • Specification

Easy to use – Without annoying adjusting. Thanks to the auto clip, the holder is always ready to put down and ready to take away.
Antishock design – Special triangle design makes mount stable as a mountain.
Durable and reliable – Made of high-quality aluminum alloy with elegant curved tempered glass panel.
Wide clips – Offers firm and steady grip without phone shaking.
Fully adjustable – Full 360 view with easy 90 horizontal and vertical angle rotations.
Convenient and timely charging – Easy access to the home touch and charging holes. You can charge your phone without taking it out of the holder.
Enhanced protection with silicone cover – The inner clip is protected with silicone material that can prevent minor scratches on the phone cover.
For every air outlet type – Accessory is compatible with 98% of car air vent types.

  • Brand: Baseus
  • Name: Future Gravity Car Mount
  • Material: Aluminum + tempered glass + silicone
  • Fixed position: Air Outlet
  • Compatibility: devices with 4-6 inches screens and 1,1 cm thickness max
  • Size: 9,8 x 5,2 x 3,2 cm
  • Weight: 85 g

Voltage and power are displayed

7.5W quick charge for iP devices

Smart charging protection

Support charging with case(≤6mm)

Baseus Digtal LED Display Wireless Charger White

  • Description
  • Specification

 Baseus Digtal LED Display Wireless Charger

 

Voltage and power are displayed

7.5W quick charge for iP devices

Smart charging protection

Support charging with case(≤6mm)

Model

BSWC-P21

Material

Plastic + Silicone

Colour

Black/White/Blue

Input

5V2A/9V1.67A(Max)

Output

5W/7.5W/10W(Max)

Suitable for

Mobile phones with wireless charging function

Page 2 of 13